fbpx

SLE30

Product sheet
Capacity (kg): 3000
Fork Length (mm): 1200/1400
Load Center (mm): 600/700
Voltage: 80 Volts
Power Supply: AC
Tyres: Pneumatic 27×10-12
Electric Motors: 2 x 12 kW (Traction) – 22 kW (Pump)
Tilting: Chassis

The electronic side loader model SLE50 is equipped with superelastic tires for driving and handling materials indoor and also outdoor in yards over even and uneven grounds. Thanks to the speed, strength and reduced dimensions in relation to the lifting capacity the SLE50 can be utilized both in outside operating areas or in inside storage warehouses.

Technical specifications:

  • About eight hours continuous operation
  • Two front steering wheels with power steering (servo assisted) and one traction AC motor plugged directly into the differential system providing for maximum power reliably transmitted to the rear axle and steering system
  • AC multiprogrammable system
  • Regenerative release braking with energy regeneration
  • Special steel profiles on lifting mast with traverse guide rollers mounted on high resistence bearings
  • Front steering axle is one single-cylinder with power steering
  • In-out crossed cylinders mast for fast and high precision motion, granting maximum safety at extreme load conditions at the same time
  • Equipped with all mandatory Safety Devices and Systems as specified by EU directive 2006/42/EC (Machinery Directive), 2004/108/EC (Electromagnetic Compatibility) and 2006/95/EC (Low Voltage Directive)
  • Supplied with Usage and Maintenance Instruction Book, Spare Parts Catalogue and Certificate of Conformity to EU directive 2006/42/EC (Machinery Directive), 2004/108/EC (Electromagnetic Compatibility) and 2006/95/EC (Low Voltage Directive)

Working with BP SLE50 is easy and safe. The cabin is designed to enable the operator to reach all the controls easily and to have a wide visibility.  The power steering and the joystick/lever position are ergonomically designed so that the control of the traction, the steering and the execution of the hydraulic movement is very simple and comfortable.

The SLE50 is designed to minimize the maintenance requirements and at the same time to allow for a safe and comfortable access to all the installed components and subsystems. Check control display is available in the dashboard to alert in case of faults. The absence of brushes in the motors reduces the required maintenance.